home *** CD-ROM | disk | FTP | other *** search
/ Usenet 1993 July / InfoMagic USENET CD-ROM July 1993.ISO / answers / fax-faq < prev    next >
Encoding:
Text File  |  1993-06-23  |  68.3 KB  |  1,675 lines

  1. Newsgroups: comp.dcom.fax,alt.fax,news.answers,alt.answers,comp.answers
  2. Path: senator-bedfellow.mit.edu!enterpoop.mit.edu!news.media.mit.edu!uhog.mit.edu!wupost!uunet!destroyer!cs.ubc.ca!merlin!reynard!pajari
  3. From: pajari@Faximum.COM (George Pajari)
  4. Subject: Fax (comp.dcom.fax) Frequently Asked Questions (FAQ)
  5. Message-ID: <C92Cuz.8K4@Faximum.COM>
  6. Followup-To: comp.dcom.fax
  7. Summary: Frequently asked questions about fax communications, protocols,
  8.     standards, modems, products, and publications.
  9. Keywords: fax faq
  10. Reply-To: faxfaq@faximum.com (FAQ Comments)
  11. Organization: Faximum Software, Vancouver, B.C., Canada
  12. Date: Wed, 23 Jun 1993 07:30:34 GMT
  13. Approved: news-answers-request@MIT.Edu
  14. Lines: 1658
  15. Xref: senator-bedfellow.mit.edu comp.dcom.fax:4688 news.answers:9674 alt.answers:452 comp.answers:1092
  16.  
  17. Archive-name: fax-faq 
  18.  
  19.  
  20. comp.dcom.fax FAQ (Frequently Asked Questions)
  21. ----------------------------------------------
  22.  
  23. 23 June 1993
  24.  
  25. This article contains the answers to some Frequently Asked Questions (FAQ)
  26. often seen in the USENET newsgroup comp.dcom.fax relating to facsimile
  27. standards, software, and hardware.  It will be posted approximately monthly. 
  28.  
  29. If you would like to make any submissions or corrections to the FAQ, please
  30. contact faxfaq@faximum.com.  Your input is greatly appreciated.  Suggested
  31. questions need not be accompanied by suggested answers.  Areas that are in
  32. particular need of contributions are marked "<Need more information>".
  33. Flames and other comments (constructive or otherwise) are also welcomed.
  34.  
  35. regards
  36. g.
  37.                               pajari@Faximum.COM
  38. George Pajari / Faximum Software / Tel: +1 (604) 925-3600 / Fax: ... 926-8182
  39.      1497 Marine Drive, Suite 300 / West Vancouver, BC / Canada  V7T 1B8
  40.  
  41.  
  42. Std. Disclaimers:
  43. ----------------
  44.  
  45. The content of this article is the sole responsibility of the author(s) and
  46. contributors, and does not necessarily represent the opinions or policies
  47. of their employers or other companies mentioned. 
  48.  
  49. The information provided herein is believed to be correct but the author and
  50. contributors cannot accept any liability for errors and omissions.  Readers
  51. are cautioned to verify any information before making decisions or taking
  52. action based upon this information.
  53.  
  54. While every reasonable effort has been taken to maintain an objective and 
  55. unbiased approach in the collection and presentation of this information,
  56. readers are advised that the author and possibly some of the contributors
  57. work for or have an interest in commercial organisations involved in the
  58. fax industry.
  59.  
  60.  
  61. =================
  62. TABLE OF CONTENTS
  63. =================
  64.  
  65. G.    Glossary
  66.  
  67. Q.    Frequently Asked Questions
  68. Q.1    Can I use my * data modem to send/receive faxes?
  69. Q.1A    Can my fax modem transmit data?
  70. Q.2    How can I fax PostScript or PCL documents using computer-based fax?
  71. Q.3    How can I view incoming faxes on my computer?
  72. Q.4    How can I print incoming faxes on my computer?
  73. Q.5    Can fax modems also handle data or voice calls?
  74. Q.6    What resolution are fax images?
  75. Q.7    Can I take a fax file and edit it?
  76. Q.8    Is there a standard program interface (API) for fax communications?
  77.  
  78. I.    Sources of Information
  79. I.1    Standards Related to Facsimile Communication
  80. I.2    Where to Obtain Standards Documents and Related Information
  81. I.3    Magazine Reviews of UNIX Fax Software
  82. I.4    Magazine Reviews of DOS/Windows Fax Software
  83. I.5    Magazine Reviews of Mac Fax Software
  84. I.6    Magazine Reviews of Fax Modems (see also O/S specific reviews)
  85. I.7    Publications Devoted to Fax and Telecommunications
  86. I.8    Books on Fax
  87. I.9    Other Sources of Information on Fax
  88. I.10    Conferences on Fax
  89. I.11    Associations Related to Fax Technology
  90.  
  91. P.    Product Information
  92. P.1    List of UNIX Fax Software
  93. P.2    List of MS-DOS Fax Software
  94. P.3    List of MacIntosh Fax Software
  95. P.4    List of Windows Fax Software
  96. P.5    List of OS/2 Fax Software
  97. P.6    List of Fax Modem Vendors
  98.  
  99.  
  100. ===============================================================================
  101. Subject:    G.  GLOSSARY
  102. ===============================================================================
  103.  
  104. ANSI/AIIM MS53-1993
  105.   The American National Standard File Format for Storage and Exchange of
  106.   Images - Bi-Level Image File Format: Part 1 (ANSI/AIIM MS53-1993) has 
  107.   recently been approved.  The standard defines a format for a file containing 
  108.   one page with one image.  Page sizes and image sizes can be specified.
  109.   Both definite length and indefinite length are supported.  Clipping of the
  110.   image can be specified.  Image coding may be according to CCITT Recs. T.4 
  111.   (one- and two-dimensional) and Rec. T.6.  Bitmap may also be specified.
  112.   Both facsimile style least significant bit and industry style most
  113.   significant bit mapping are supported.
  114.   (Definition courtesy of hrs1@cbnewsi.cb.att.com (herman.r.silbiger))
  115.  
  116. BFT or
  117. Binary File Transfer
  118.   A method of transferring files using fax modems (as an extension to the
  119.   fax protocol).  This standard, which will be approved shortly, will be
  120.   referred to as T.434.  
  121.  
  122. Brooktrout Patent (taken from a press release from Brooktrout)
  123.   Brooktrout's patent (number 4,918,722), issued by the US patent office 
  124.   in 1990, covers generally any method for the selection of facsimile messages 
  125.   and their deliver to a particular telephone number under control of commands
  126.   entered through a telephone, for example in the form of signals generated 
  127.   from the telephone's touch-tone keypad.  This method is employed in many 
  128.   fax-on-demand systems, which provide business users and service providers the 
  129.   ability to offer automated fax delivery of specified information in response 
  130.   to requests from customers, subscribers or other callers.
  131.   [Editor's note: this patent is the subject of litigation and the current
  132.    status or validity of this patent is not known.]
  133.  
  134. CAS
  135.   An API for fax devices invented by Intel and DCA and tied to the Intel
  136.   and MS-DOS architectures. More detailed information is available from the
  137.   Intel BBS listed below.
  138.  
  139.  
  140. CCITT
  141.   Comite Consultatif International Telegraphique et Telephonique (a.k.a. The
  142.   International Telegraph and Telephone Consultative Committee) is a body of
  143.   the I.T.U. (International Telecommunication Union) which is a body of the
  144.   United Nations.  The CCITT is responsible for setting the international
  145.   standards for telecommunications equipment.  Its members are the national
  146.   authorities in each country responsible for regulating and providing
  147.   telecommunication services. The standards are called Recommendations and
  148.   the recommendations of relevance to the fax world are the T series which
  149.   govern the fax protocols and the V series which govern modem operation.
  150.   (See also ITU, T.*, and V.*, below.)
  151.  
  152.  
  153. CED or
  154. Called Station Identifier
  155.   The distinctive tone generated by a Group III fax machine when it
  156.   answers the phone (2100 Hz).
  157.  
  158.  
  159. Class 1
  160.   The Class 1 fax modem standard describes an extension to the "Hayes Modem
  161.   Command Set" to permit computers to send and receive faxes using fax modems.
  162.   The Class 1 standard is a low-level specification in which most of the 
  163.   protocol work (i.e. T.30) as well as image generation (rasterising and T.4
  164.   compression) must be done by the computer (in software) while the modem only 
  165.   handles the basic modulation as well as converting the asynchronous data 
  166.   from the computer into the synchronous packets used in fax communications.
  167.  
  168.   The primary advantage of Class 1 modems is that fax protocol is implemented
  169.   in software which means that new extensions to the fax protocol standard
  170.   (i.e. T.30) can be implemented without requiring a ROM change in the modem
  171.   (or without waiting for the modem manufacturer to get around to supporting
  172.   the new feature).
  173.  
  174.   The primary disadvantages are (a) the software vendor has to handle the
  175.   complexity of the T.30 protocol and (b) Class 1 (almost by definition)
  176.   is very sensitive to timing and multi-tasking operating systems (such as
  177.   *IX) have great difficulty in reliably meeting the tight timing constraints
  178.   and maintaining the fax connection.  Lifting this timing limitation is the
  179.   primary motivation behind the new proposed Class 4 standard.
  180.  
  181.   The official standard for Class 1 is EIA/TIA-578.
  182.  
  183.   Although the official standard is copyright EIA/TIA/ANSI, a draft version
  184.   has been published electronically by Supra and is available from their
  185.   BBS (see below for the number) and from Sam Leffler at SGI (retrieve his
  186.   FlexFax package, described below).
  187.  
  188.  
  189. Class 2
  190.   The Class 2 fax modem standard describes an extension to the "Hayes Modem
  191.   Command Set" to permit computers to send and receive faxes using fax modems.
  192.   The Class 2 standard is a higher-level specification in which most of the
  193.   protocol work (i.e. T.30) is done by the modem while the computer is
  194.   responsible for managing the session and providing the image data in the
  195.   appropriate format (i.e. T.4).
  196.  
  197.   The primary advantage of Class 2 is that the low-level detail work is
  198.   handled by the modem.  Not only does this mean that software developers
  199.   do not have to be burdened with having to support the T.30 protocol, it
  200.   also relieves the host computer of all of the time-critical aspects of
  201.   fax communications, making support of Class 2 modems under *IX systems
  202.   possible.
  203.  
  204.   The biggest headache for software developers is that the Class 2 standard
  205.   took a long time to be approved (more for political than technical reasons,
  206.   IMHO) and many companies did not wait for the final version to be approved
  207.   before shipping modems.  As a result we have a situation (as of 93Q1) in
  208.   which all shipping Class 2 modems adhere (more or less) to the first draft
  209.   of the TR29.2 committee (document SP-2388) and not to the standard as it
  210.   was approved. To compensate for this, the "new" Class 2 is referred to as
  211.   Class 2.0 and the "old" as plain Class 2.
  212.  
  213.   (Warning - flame from a frustrated fax programmer on...)
  214.   Even more disconcerting is the fact that most companies who have implemented
  215.   (the old) Class 2 have done one or more things wrong (they must have been 
  216.   smoking *and* inhaling) so we have a further division of the standard into 
  217.   "true, old Class 2" (which includes the Everex 24/96D and MultiTech modems)
  218.   and everything else (mostly based on the Rockwell chip which differs from
  219.   SP-2388 in a number of ways, although some other chip makers, such as EXAR,
  220.   have found even more ways than Rockwell to depart from SP-2388).  It's so bad 
  221.   that most modem companies now implement the Rockwell version of Class 2 just 
  222.   because so many of the *%#& things have been shipped (i.e. Multitech has a 
  223.   special command which switches their modem from proper Class 2 operation to 
  224.   Rockwell-like operation just so they can interoperate with DOS software that 
  225.   expects Rockwell-like operation).  And of course no one at Rockwell or EXAR
  226.   or the other companies bothered to write down the difference between their
  227.   version of Class 2 and the TR29.2 document. (Flame off.)
  228.  
  229.   The draft standard for the "old" Class 2 is SP-2388, Document 
  230.   TR-29/89-21R8, dated March 21, 1990.  This is available by contacting the
  231.   EIA/TIA directly.  This is the standard implemented by all Class 2 modems
  232.   currently on the market (true to the best of my (pajari) knowledge as of 
  233.   26 Apr 93).
  234.  
  235.   The official standard for the "new" Class 2.0 (also referred to as
  236.   Class 2.0) is EIA/TIA/ANSI-592.  This document ought to be available from
  237.   Global Engineering Documents (see below) by May 3rd, 1993. As far as I 
  238.   (pajari) am aware, there are no true Class 2.0 modems yet shipping (as of
  239.   26 Apr 1993).
  240.  
  241.   Note that although many modems that implement Class 2 also support Class 1,
  242.   Class 1 is *not* a subset of Class 2. Also, there are some modems that only
  243.   support Class 2 and many that only support Class 1.
  244.  
  245.   Although the official standard is copyright EIA/TIA/ANSI, a draft version
  246.   has been published electronically by Supra and is available from their
  247.   BBS (see below for the number) and from Sam Leffler at SGI (retrieve his
  248.   FlexFax package, described below).
  249.  
  250.  
  251. Class 3
  252.   A class number reserved for a project to define a standard for fax modems
  253.   that would, in addition to handling the T.30 protocol (i.e. Class 2), also
  254.   handle the conversion of ASCII data streams into images (i.e. T.4). Although
  255.   there are a couple of fax modems that handle the ASCII to fax conversion,
  256.   no draft document has been circulated and the future of this project is in
  257.   doubt.
  258.  
  259.  
  260. Class 4
  261.   Class 1 with intelligent buffering to reduce the need for the host
  262.   computer to respond instantly to the fax modem. This standard is expected
  263.   to go out to ballot in 93Q2.
  264.  
  265.  
  266. Class 8
  267.   Not a fax standard at all but an extension to the Hayes command set to
  268.   support voice.
  269.  
  270.  
  271. CNG or
  272. Calling Tone
  273.   The distinctive tone that a fax machine ought to generate when placing
  274.   a fax call (1100 Hz on for 1/2 second, off for 3 seconds).
  275.  
  276.  
  277. CSI or
  278. Called Subscriber Information
  279.   The "name" of the answering fax machine.  An optional frame of information
  280.   sent to the calling fax machine during Phase B (see T.30 below). Although
  281.   many fax machines permit ASCII information, the T.30 standard states that
  282.   this is to contain the international phone number of the fax machine, 
  283.   including the plus symbol, the country code, the area code, and the
  284.   subscriber number using only digits, the plus symbol, and a space.
  285.   (i.e. the North American fax number (604) 926-8182 ought to be programmed
  286.   into the fax machine as +1 604 926 8182).
  287.  
  288.  
  289. ECM or
  290. Error Correcting Mode
  291.   An extension to T.30 to permit the receiving fax machine to request that
  292.   portions of an image that were received with errors be retransmitted.
  293.  
  294.   Normally the T.4/T.30 protocol is error detecting but not error correcting.
  295.   The receiving fax machine can usually tell when an error has impaired the
  296.   image but cannot selectively request retransmission of the damaged portions
  297.   of the image.  The only options are to (a) ignore the errors (if few in 
  298.   number), (b) request that the page be resent (ignored by most fax machines),
  299.   or (c) give up.
  300.  
  301.  
  302. EIA/TIA
  303.   The Electronics Industry Association and the Telecommunications Industry
  304.   Association.  The U.S. bodies responsible for the development of standards
  305.   related to telecommunications in general and for fax in particular.
  306.  
  307.  
  308. EIA/TIA-465
  309.   The US version of T.4 (will probably be accepted as T.4 in the near 
  310.   future).
  311.  
  312.  
  313. EIA/TIA-466
  314.   The US version of T.30 (will probably be accepted as T.4 in the near 
  315.   future).
  316.  
  317.  
  318. EIA/TIA-578
  319.   See the definition of Class 1 (above).
  320.  
  321.  
  322. EIA/TIA-592
  323.   See the definition of Class 2 (above).
  324.  
  325.  
  326. EIA/TIA-602
  327.   The ANSI/EIA/TIA standard for the "Hayes Command Set" for modems.
  328.  
  329.  
  330. FaxBios
  331.   An industry consortium (including companies such as HP, WordPerfect, etc.)
  332.   that has published a specification for a FAX API.  Versions for
  333.   DOS and WINDOWS have been developed and discussions continue on adapting
  334.   this API to other operating systems.
  335.  
  336.   FaxBios Association, 2625 Alcatraz Avenue, Suite 275, Berkeley, CA, 94705
  337.   Fax: 510 540 5835.  See also the Compuserve forum GO FAXBIOS.
  338.  
  339.  
  340. Group I Fax
  341.   An old (now obsolete) standard for fax machines in which a page was 
  342.   transmitted in about six minutes at a resolution of 98 scan lines/inch.
  343.   Group I devices frequently worked by attaching the page to be transmitted 
  344.   to a rotating drum (at 180 rpm) along which a photocell moves.  Either 
  345.   amplitude modulation (the blacker the pixel the louder the tone) or 
  346.   frequency modulation (the blacker the pixel the higher the tone) can be used.
  347.   The gory details may be found in CCITT Recommendation T.2.
  348.  
  349.  
  350. Group II Fax
  351.   An old (now almost obsolete) standard for fax machines in which a page was 
  352.   transmitted in about three minutes at a resolution of 100 scan lines/inch.
  353.   Group II uses vestigial sideband amplitude modulation with phase shifts.
  354.   A white pixel is represented by a louder tone.
  355.  
  356.  
  357. Group III
  358.   One of the current standards for fax machines in which a page is transmitted
  359.   in about one minute.  See the definition of T.30 (below) for more details.
  360.  
  361.  
  362. Group IV
  363.   A standard for fax transmission using ISDN at 64kbps. 
  364.  
  365.  
  366. ITU
  367.     The International Telecommunication Union (ITU) is the United Nations 
  368.     specialized agency dealing with telecommunications.
  369.  
  370.     The purposes of the ITU as defined in the Convention are:
  371.         - to maintain and extend international cooperation for the improvement 
  372.       and rational use of telecommunication of all kinds;
  373.         - to promote the development of technical facilities and their most 
  374.       efficient operation with a view to improving the efficiency of 
  375.       telecommunication services, increasing their usefulness and making 
  376.       them, so far as possible, generally available to the public;
  377.         - to harmonize the actions of nations in the attainment of those 
  378.       common ends.
  379.  
  380.     The ITU works to fulfil these basic purposes in three main ways:
  381.         1. international conferences and meetings;
  382.     2. technical cooperation;
  383.     3. publication of information, world exhibitions.
  384.  
  385.  
  386.     The ITU is an organization, a union, of Member countries. At present there 
  387.     are 166 Members.
  388.  
  389.     The Union's headquarters are in Geneva, in the Place des Nations. In this 
  390.     building are to be found the five permanent organs:
  391.  
  392.     General Secretariat
  393.     1. Co-ordination and publication of telecommunication service data 
  394.        needed for operation of services.
  395.     2. External and legal representation of the Union.
  396.     3. Planning and management of technical cooperation and related 
  397.        development programmes for developing countries.
  398.     4. Provision of secretariat of conferences.
  399.     5. Administration, finance, computer, conference and public 
  400.        information services.
  401.     6. Membership protocol.
  402.  
  403.     International Frequency Registration Board (IFRB)
  404.     The IFRB consists of five independent radio experts, all from different
  405.     regions of the world, elected by Plenipotentiary Conferences and 
  406.     working full-time at the Union's headquarters in Geneva. They elect a 
  407.     Chairman and a Vice-Chairman for each year from among their own number.
  408.  
  409.     The Board's main task is to decide whether radio frequencies which 
  410.     countries assign to their radio stations (and which they have notified 
  411.     to the Board) are in accordance with the Convention and the Radio 
  412.     Regulations and will not cause harmful interference to other stations. 
  413.     If the Board's finding in a particular case is favourable, the 
  414.     frequency is recorded in the huge Master International Frequency 
  415.     Register kept by the IFRB and thus obtains formal international 
  416.     recognition and protection. An average of more than 1200 frequency 
  417.     assignment notices, covering new assignments or changes to existing 
  418.     assignments, arrives at the IFRB each week.
  419.  
  420.     International Radio Consultative Committee (CCIR) and
  421.     International Telegraph and Telephone Consultative Committee (CCITT)
  422.     The two CCIs are separate bodies dealing respectively with technical 
  423.     radio problems and technical telegraph and telephone problems. All 
  424.     Member countries of the Union can participate in their work, and also 
  425.     certain private companies operating telecommunication services.
  426.  
  427.     Each CCI holds a Plenary Assembly every few years. The Plenary Assembly
  428.     draws up a list of technical telecommunication subjects or "Questions",
  429.     the study of which would lead to improvements in international 
  430.     radiocommunication or international telegraphy and telephony. These 
  431.     Questions are then entrusted to a number of Study Groups, composed of 
  432.     experts from different countries. The Study Groups draw up 
  433.     Recommendations which are submitted to the next Plenary Assembly. If 
  434.     the Assembly adopts the Recommendations, they are published. CCIR and 
  435.     CCITT Recommendations have an important influence with 
  436.     telecommunication scientists and technicians, operating Administrations
  437.     and companies, manufacturers and designers of equipment throughout the 
  438.     world.
  439.  
  440.  
  441.     Telecommunications Development Bureau (BDT)
  442.     The BDT was set up by the Nice Plenipotentiary Conference (1989) with 
  443.     the aim of strengthening technical assistance and cooperation 
  444.     activities with the developing countries. It is part of the federal 
  445.     structure of the Union and has the same status as the other organs 
  446.     which deal with regulations, standardization and coordination.  The 
  447.     duties of the Bureau are in principe to fulfil, in the field of 
  448.     technical assistance to the developing countries. It is also 
  449.     responsible for making other funding arrangements so as to facilitate 
  450.     and enhance telecommunications development by offering, organizing and 
  451.     coordinating technical cooperation and assistance activities.  Within 
  452.     the framework of these projects, hundreds of experts share both their 
  453.     skills and their long-standing experience with the local counterparts 
  454.     they are training.
  455.  
  456.  
  457. MH or Modified Huffman compression
  458.   Also known as Group III one-dimensional compression.  See T.4.
  459.  
  460.  
  461. MR or Modified READ compression
  462.   Also known as Group III two-dimensional compression.  See T.4.
  463.  
  464.  
  465. One-Dimensional Compression
  466.   See T.4
  467.  
  468.  
  469. SP-2388
  470.   The first draft standard for Class 2 that was implemented by many
  471.   companies while waiting for the final standard to be approved
  472.   (see also the definition for Class 2 above).
  473.  
  474.  
  475. T.1
  476.   See Group I Fax.
  477.  
  478.  
  479. T.4
  480.  One of the <CCITT> recommendations (i.e. standard) for Group III fax. 
  481.  In particular, this recommendation covers the page size, resolution, 
  482.  transmission time, and coding schemes supported for Group III fax.
  483.  (See also the definition of T.30 below.)
  484.  
  485.  The basic coding scheme (called in the recommendation "One-dimensional coding
  486.  scheme" but also known in the industry as MH or Modified Huffman) takes each
  487.  scan line of pixels and compresses it by (a) converting the raster in a 
  488.  sequence of run lengths (the number of white pixels followed by the number
  489.  of black pixels followed by the number of white pixels etc. and etc. until
  490.  the entire raster has been converted into runlengths) and (b) encoding each
  491.  run length into a unique variable-length bit string.  The code words used
  492.  for white and black runlengths are different and have been chosen in order
  493.  to do a reasonable job of compressing a "typical" fax page.
  494.  
  495.  For example, in one dimensional encoding the following raster:
  496.  
  497.          OOOOOOOOOO****OOOOOO**OOOOOOO*OOOOOOOOO***...
  498.     converted into run lengths:
  499.          10 4 6 2 7 1 9 3 ...
  500.     encoded into MH bit strings:
  501.          00111 011 1110 11 1111 010 10100 10
  502.     (spaces have been added for readability and are not part of the
  503.      MH bit string)
  504.     
  505.  
  506.     Since our example has unusually short white run-length it does
  507.     not accurately illustrate the degree of compression which can
  508.     be achieved.  For example, a normal fine resolution fax image
  509.     contains about 3,800,000 pixels (464K).  Using one-dimensional
  510.     encoding this can be reduced to between 20K - 50K.
  511.  
  512.   In two-dimensional encoding, the first line of a group of lines is compressed
  513.   using one-dimensional coding (see above) and subsequent lines are compressed
  514.   using an algorithm that describes line n in terms of line n-1.  Since there 
  515.   is usually a high-degree of correlation between the pixels of adjacent scan 
  516.   lines, this usually results in significant compression.  
  517.  
  518.   Since the basic fax protocol (T.30) is error detecting (but not error
  519.   correcting), there is a limit on the number of two-dimensionally compressed
  520.   scan lines that can follow a 1-D line.  This is to limit the propagation
  521.   of errors through an image.  This limit is referred to as 'k' in the
  522.   standard and is 2 for standard-resolution faxes and 4 for high-resolution
  523.   faxes.
  524.   
  525.   Unfortunately, this method of compression is computationally intensive and 
  526.   most (inexpensive) fax machines do not support it.
  527.  
  528.  
  529. T.6
  530.   The recommendation that covers the image compression algorithm used for
  531.   Group IV fax machines.
  532.  
  533.   T.6 is essentially the two-dimensional compression algorithm from T.4 (see 
  534.   above) except that 'k' is infinite (i.e. all lines are two dimensionally
  535.   compressed). This can be done because Group IV fax machines operate over
  536.   an error-free communications channel.
  537.  
  538.  
  539. T.30
  540.  One of the <CCITT> recommendations (i.e. standard) for Group III fax. 
  541.  In particular, this recommendation covers the protocol used to manage
  542.  the session and negotiate the capabilities supported by each fax machine.
  543.  The details of the image format are covered by the T.4 recommendation
  544.  (see above).
  545.  
  546.  The protocol describes each fax call as proceeding through five phases:
  547.  
  548.     A:    Call Set-Up
  549.  
  550.     This phase covers the placing of the call on the PSTN and the
  551.     distinctive tones the calling and called stations are to emit.
  552.  
  553.  
  554.     B:    Pre-Message Procedure for Identifying and Selecting Facilities
  555.  
  556.     During this phase the two fax machines:
  557.       - agree on whether to use tones or binary codes to exchange
  558.         information on capabilities (most current fax machines use 
  559.         binary codes)
  560.       - (optionally) the called machine sends a CSI frame identifying
  561.         it to the calling machine.
  562.       - the called machine sends a DIS frame telling the calling
  563.         machine what capabilities it has (i.e. resolution, page
  564.         size, receiving speed, etc.)
  565.       - (optionally) the calling machine sends a TSI frame identifying
  566.         it to the called machine.
  567.       - the calling machine sends a DCS frame telling the called
  568.         machine what capabilities are in effect for this document
  569.         (based on the calling machine's capabilities and the information
  570.         received in the DIS frame).
  571.       - the two machines determine the maximum baud rate that the
  572.         communications link will reliable sustain (training & phasing)
  573.  
  574.  
  575.     C:    Message Transmission
  576.  
  577.     The fax is sent.  The end of the last scan line is marked by a
  578.     RTC code (return to control).
  579.  
  580.  
  581.     D:    Post-Message Procedure including End-of-message, Confirmation,
  582.     and Multi-Page Procedures
  583.  
  584.       - the calling machine indicates what it wants to do next
  585.         (send another page, terminate the call, request operator
  586.         intervention, etc.).
  587.       - the called machine indicates its response to the page and command
  588.         just received (o.k., o.k. but retrain, not o.k., give up, etc.)
  589.     
  590.     At this point the machines go to one of phase B, C, or E depending
  591.     on the exchange of commands and responses during phase D.
  592.  
  593.  
  594.     E:    Call Release
  595.     
  596.     Hang up the phone.
  597.  
  598. T.434
  599.   The standard for Binary File Transfer Format (a method of encoding documents
  600.   and sending them by fax without converting them to image format first.
  601.  
  602. T.611
  603.   A standard for high-level fax API.
  604.   <More information needed>
  605.  
  606.  
  607. TSI or
  608. Transmitting Subscriber Information
  609.   The "name" of the calling fax machine.  An optional frame of information
  610.   sent by the calling fax machine during Phase B (see T.30 above).  See
  611.   CSI (above) for details on the recommended format.
  612.  
  613.  
  614. Two-Dimensional Compression
  615.   See T.4.
  616.  
  617.  
  618. V.17
  619.   The CCITT recommendation for 14,400 bps *synchronous* half-duplex 
  620.   modems.  Used during the image transmission phase of fax 
  621.   communications. Optional (most fax machines do not support V.17).
  622.  
  623.  
  624. V.22bis
  625.   The CCITT recommendation for 2400 bps asynchronous full-duplex modems.
  626.   (Not used in fax but frequently supported by modems that handle fax.)
  627.  
  628.  
  629. V.27ter
  630.   The CCITT recommendation for 2400 and 4800 bps *synchronous*
  631.   half-duplex modems.  Used during the image transmission phase of fax 
  632.   communications.
  633.  
  634.  
  635. V.29
  636.   The CCITT recommendation for 7200 and 9600 bps *synchronous*
  637.   half-duplex modems.  Used during the image transmission phase of fax 
  638.   communications.
  639.  
  640.  
  641. V.32
  642.   The CCITT recommendation for 9600 bps asynchronous full-duplex modems.
  643.   (Not used in fax but sometimes supported by modems that also handle fax.)
  644.  
  645.  
  646. V.32bis
  647.   The CCITT recommendation for 14,400 bps asynchronous full-duplex 
  648.   modems.  (Not used in fax but sometimes supported by modems that
  649.   also handle fax.)
  650.  
  651.  
  652. V.42
  653.   The CCITT recommendation for error-checking and correction.
  654.   (Not used in fax but sometimes supported by modems that also handle fax.)
  655.  
  656.  
  657. V.42bis
  658.   The CCITT recommendation for data compression.
  659.   (Not used in fax but sometimes supported by modems that also handle fax.)
  660.  
  661.  
  662. ===============================================================================
  663. Q.    Frequently Asked Questions
  664. ===============================================================================
  665.  
  666. Q.1    Can I use my * data modem to send/receive faxes?
  667. -------------------------------------------------------------------------------
  668.  
  669. In a word, no.  Unless your data modem has specific additional support for fax,
  670. you cannot communicate with fax devices using a data (only) modem.
  671.  
  672. Simply put, the problem is that the modulation methods (tones) used to 
  673. communicate data are different from those used to communicate faxes.
  674.  
  675. Typically the modulation schemes used for fax are synchronous half-duplex
  676. while those used for data (at least by most UNIX and PC people) are 
  677. asynchronous and full-duplex.
  678.  
  679. Also, data modems, once they have negotiated a modulation scheme, tend to
  680. continue with the same one through out the session.  Fax modems switch
  681. before and after each page between a high-speed modulation scheme used 
  682. to transmit the image data and a lower (300 or 2400 bps) scheme to exchange 
  683. control information.
  684.  
  685. The following table outlines this briefly  (see also above for definitions
  686. of V.*).
  687.  
  688.   Data Rate                   Data Modulation Std.       Fax Modulation Std.
  689.   ========================+==========================+========================
  690.    9,600 bps              |            V.32          |       V.29
  691.   ------------------------+--------------------------+------------------------
  692.   14,400 bps              |            V.32bis       |       V.17
  693.   ========================+==========================+========================
  694.  
  695.  
  696. -------------------------------------------------------------------------------
  697. Q.1A    Can my fax modem transmit data?
  698. -------------------------------------------------------------------------------
  699.  
  700. In a word, maybe.  There is a standard proposed by the EIA/TIA/ANSI called 
  701. Binary File Transfer (BFT) that extends the fax Group III modulation and 
  702. protocols for bulk data transfer.
  703.  
  704. The problem, of course, is that few fax modems or software packages provide
  705. support for this mechanism.
  706.  
  707.  
  708. -------------------------------------------------------------------------------
  709. Q.2    How can I fax PostScript or PCL documents using computer-based fax?
  710. -------------------------------------------------------------------------------
  711.  
  712. In addition to the basic software to drive your fax modem/board, you will need
  713. specific software that can convert PostScript or PCL files into a raster image
  714. format compatible with your fax software package.
  715.  
  716. GhostScript, for example, is a publically available software package that
  717. can convert PostScript into raster image format (although there are varying
  718. opinions on the quality of the font support).
  719.  
  720. In the commercial world, most of the vendors of fax software provide software
  721. that can handle PostScript and/or PCL.
  722.  
  723. When purchasing such software (a) check how many different fonts are supported
  724. (it's a pain to be able to use, say, NewCentury on your laser printer only to 
  725. find it is not included in your fax package), and (b) in the case of PCL, check
  726. which level of the language is supported (PCL-4 does not support scalable 
  727. fonts, PCL-5 does).
  728.  
  729.  
  730. -------------------------------------------------------------------------------
  731. Q.3    How can I view incoming faxes on my computer?
  732. -------------------------------------------------------------------------------
  733.  
  734. In the PD world, there are a number of image-viewing packages available for
  735. X (such as xv).
  736.  
  737. In the commercial world, most fax vendors provide support for the commonly
  738. available devices (in the case of UNIX, X; in the case of PC-UNIX, VGA
  739. and HGA support. Some vendors support other graphics-capable terminals such as
  740. the Wyse WY-160.)
  741.  
  742.  
  743. -------------------------------------------------------------------------------
  744. Q.4    How can I print incoming faxes on my computer?
  745. -------------------------------------------------------------------------------
  746.  
  747. Most fax software packages include software to convert fax images into print
  748. data streams compatible with dot matrix, HP PCL, or PostScript printers.
  749.  
  750. Also the publically available (where?) pbmplus filter kit will handle most
  751. image formats.
  752.  
  753.  
  754. -------------------------------------------------------------------------------
  755. Q.5    Can fax modems also handle data or voice calls?
  756. -------------------------------------------------------------------------------
  757.  
  758. Not all fax boards can handle data (some are fax only).  Most (all?) 
  759. external fax modems can handle data as well as fax.
  760.  
  761. Some (but not all) fax modems and software can automatically distinguish 
  762. between data and fax calls and answer them appropriately
  763.  
  764. Some DOS/WINDOWS based products can automatically distinguish between voice and
  765. fax/data calls and operate as a digital answer machine as well as a fax machine.
  766.  
  767. Also, several companies sell devices which can switch incoming calls between a
  768. fax machine, a telephone answering machine, and a modem.
  769.  
  770. [Suggestions anyone?]
  771.  
  772.  
  773. -------------------------------------------------------------------------------
  774. Q.6    What resolution are fax images?
  775. -------------------------------------------------------------------------------
  776.  
  777. The standard resolution for faxes is 3.85 scan lines/mm (approx. 98 dpi
  778. vertically) with 1728 pixels across a standard scan line of 215 mm (approx.
  779. 204 dpi horizontally).
  780.  
  781. The optional "fine" resolution is 7.7 scan lines/mm (approx. 196 dpi
  782. vertically) with the same horizontal resolution.
  783.  
  784. Many Group III fax machines use non-standard frames to negotiate higher 
  785. resolutions (typically 300x300 dpi and 400x400 dpi) with other fax machines 
  786. by the same manufacturer.
  787.  
  788. Two fax machines (or modems) must negotiate a common resolution, page width,
  789. and page length before sending each page.  The standard requires that all
  790. Group III fax machines suppport at least standard resolution and A4 size
  791. so that common ground can always be found.
  792.  
  793. Extensions to the Group III standard to support these higher resolutions
  794. in a standard way have been proposed.  Their current status is not known
  795. <Need more information>.
  796.  
  797. <Need more information on resolutions supported by Group IV>.
  798.  
  799.  
  800. -------------------------------------------------------------------------------
  801. Q.7    Can I take a fax file and edit it?
  802. -------------------------------------------------------------------------------
  803.  
  804. When faxes exchange information, it is done in the form of compressed images
  805. (with the exception of BFT).  If you wish to edit or otherwise manipulate a
  806. received fax file you have two options:
  807.  
  808.  1 - edit the file using a "paint" program that will accept the fax file
  809.      (unfortunately there is a wide range of file formats for image files
  810.      and you may have to work to find a format that is common between your
  811.      fax application and your paint program).
  812.  
  813.  2 - pass the file through an OCR program that will attempt to convert the
  814.      image into ASCII (or word processing file format).  The problem here is
  815.      that most OCR programs are tuned to work with 300x300dpi images and faxes
  816.      are either 98x204 or 196x204.
  817.  
  818.  
  819. -------------------------------------------------------------------------------
  820. Q.8    Is there a standard program interface (API) for fax communications?
  821. -------------------------------------------------------------------------------
  822.  
  823. There are many API's that are used for fax communications. Words marked by
  824. -word- are further explained in the glossary above.
  825.  
  826. At the hardware level, the two standards that govern the exchange of commands
  827. between a host computer and a fax modem are EIA-578 (-Class 1-) and EIA-592
  828. (-Class 2-).
  829.  
  830. At the software level there is one "official" standard and a number of
  831. "industry standards".  The one "official" standard is CCITT T.611
  832. (<need more information on this standard>).
  833.  
  834. The most widely known industry standards are -CAS- (Communicating Applications
  835. Standard (?)) invented by Intel and DCA and tied closely to the Intel 
  836. architecture, and -FaxBios- (developed by an industry consortium) which is less 
  837. machine-dependent (implementations for MS-DOS and WINDOWS have been published 
  838. and sporadic work on UNIX and other bindings is underway).
  839.  
  840.  
  841. ===============================================================================
  842. Subject:    I.  Sources of Information
  843. ===============================================================================
  844.  
  845.  
  846. I.1    Standards Related to Facsimile Communication
  847. -------------------------------------------------------------------------------
  848.  
  849. CCITT
  850.  The Blue Book, Volume VII - Fascicle VII.3 Recommendation T.0 - T.63
  851.  
  852. EIA/TIA/ANSI
  853.  EIA/TIA-602 Data Transmission Systems and Equipment-Serial Asynchronous 
  854.  Automatic Dialing and Control
  855.      "This is the standard for the basic Hayes command set."
  856.  
  857.  TIA PN-2388 Asynchronous Facsimile DCE Control Standard (DRAFT), Service 
  858.  Class 2, (also known as Document TR-29/89-21R8, March 21, 1990)
  859.      "The first draft of the Class 2 standard, voted down, but the basis for
  860.      all current (93Q1) Class 2 modems."
  861.  
  862.  EIA/TIA-578 Asynchronous Facsimile DCE Control Standard, Service Class 1
  863.  
  864.  EIA/TIA-592  Asynchronous Facsimile DCE Control Standard, Service Class 2
  865.      (Expected to be available from Global Engineering Documents by 
  866.      June 3rd, 1993).
  867.  
  868.  
  869. -------------------------------------------------------------------------------
  870. I.2    Where to Obtain Standards Documents and Related Information
  871. -------------------------------------------------------------------------------
  872.  
  873.  
  874. EIA/TIA
  875.  (202) 457-4942 (Yvette Bottoms)
  876.  Source of draft EIA/TIA standards (final stds available from Global)
  877.  
  878. Global Engineering Documents 
  879.   (800) 854-7179  fax: (202) 331-0960
  880.   Distributor for published EIA/TIA standards, as well as CCITT and standards 
  881.   docs from 400 other organisations and institutions.
  882.   EIA catalog of standard available at no charge
  883.  
  884. National Technical Information Service (NTIS)
  885.   (703) 487-4650
  886.  
  887. Philips Business Information Inc. (has acquired assets of OMNICOM)
  888.     (301) 424-3338 or 1 (800) 777-5006, FAX: (301) 309-3847
  889.     Source of CCITT and ISO publications
  890.  
  891. UN Bookstore  
  892.   CCITT Publications
  893.   +1 (212) 963-7680 or +1 (800) 553-3210
  894.  
  895.  
  896. Action Consulting
  897.   Source of draft communications standards
  898.  
  899.  
  900. Human Communications
  901.   (203) 746-4367   FAX: (203) 746-4367
  902.   Source of draft communications standards
  903.  
  904. International Telecommunications Union electronic document distribution
  905.   service (TELEDOC)
  906.   For more information, send a message with the line HELP in the body to:
  907.   itudoc@itu.arcom.ch
  908.  
  909.  
  910.  
  911. -------------------------------------------------------------------------------
  912. I.3    Magazine Reviews of UNIX Fax Software
  913. -------------------------------------------------------------------------------
  914.  
  915. UNIX WORLD, August 1991, pp. 52-60, "Four Fitting Fax Packages", Rick Farris
  916.     Reviews DigiFax, Faximum, TruFax, and VSI-Fax
  917.  
  918. UNIX REVIEW, V10n11, Nov 1992, pp. 63-76,  "Just the Fax, Ma'am", Tim Parker
  919.     Reviews ArnetFAX, DigiFax, Faximum, FaxLink, FaxTrax, VSI-Fax
  920.  
  921.  
  922. -------------------------------------------------------------------------------
  923. I.4    Magazine Reviews of DOS/Windows Fax Software
  924. -------------------------------------------------------------------------------
  925.  
  926. PC Magazine, 8 Dec 1992, v11n21, p275-342, "The Fax Solution", by Joel Dreyfus
  927.     Reviews BitFax, DosFax Pro, Eclipse FAX, FAXability Plus, Faxit for DOS
  928.     Faxit for Windows, FaxMaster, Fax Talk Plus, The Fax Window, 
  929.     Mirror III Fax, MTEZ Standard with ExpressFax, PaperWorks, and SuperFax
  930.     for Windows.
  931.  
  932. PC World, Feb 1993 <details of this issue needed>
  933.  
  934. BYTE, Jan 1993, v18n1, p62-64, "First Impressions", by David Andres
  935.     Discusses Delrina's WinFax Pro 3.0
  936.  
  937. BYTE, Jan 1993, v18n1, p68, "First Impressions", by Dick Pountain
  938.     Discusses Trio's Datafax
  939.  
  940. -------------------------------------------------------------------------------
  941. I.5    Magazine Reviews of Mac Fax Software
  942. -------------------------------------------------------------------------------
  943.  
  944. <Need information>
  945.  
  946. -------------------------------------------------------------------------------
  947. I.6    Magazine Reviews of Fax Modems (see also O/S specific reviews)
  948. -------------------------------------------------------------------------------
  949.  
  950. PC Magazine, 8 Dec 1992, v11n21, p343-361, "Negotiating the Fax Modem Jungle"
  951.     by Rick Ayre
  952.     Reviews Computer Peripherals, Hayes, Intel, Practical Modem, Supra,
  953.     U.S. Robotics, and Zoom.
  954.  
  955. NeXTWorld Magazine, Winter 1992, v2n4, p59-60, "Just the Fax"
  956.     by Simson L. Garfinkel
  957.         Reviews Dove, HSD, and ZyXEL.
  958.  
  959.  
  960.  
  961. -------------------------------------------------------------------------------
  962. I.7    Publications Devoted to Fax and Telecommunications
  963. -------------------------------------------------------------------------------
  964.  
  965. Communications Standards Review [10-12/year, $695/year in N.A.; partial or 
  966.                 shorter subs avail., contact publisher]
  967.   757 Greer Road, 
  968.   Palo Alto, 
  969.   CA 94303-3024 USA
  970.   Phone: +1-415-856-9018  Fax: +1-415-856-6591  e-mail: 72540.113@Compuserve.Com
  971.   Communications Standards Review is a journal providing current technical 
  972.   information on work in progress on communications standards (including
  973.   fax) in US and international standards forums.  
  974.  
  975.  
  976. EMMS  [Bi-weekly, $595 per year]
  977.   published by Telecommunications Reports
  978.   1333 H Street, 11th Floor
  979.   Washington DC 20005
  980.   Phone: (202) 842-0520  Fax: (202) 842-3047
  981.  
  982.  
  983. Human Communications Digest, [Quarterly, $195 per year within US, 
  984.                 contact publisher for outside US]
  985.   published by Human Communications
  986.   12 Kevin Drive, Danbury CT, 06811-2901
  987.   Phone: (203) 746-4367   FAX: (203) 746-4367
  988.   A digest of recent developments with fax and related standards.
  989.  
  990.  
  991. NetFax News, published by Davidson Consulting [Monthly, $contact publisher]
  992.   530 N. Lamer Street, Burbank, CA, 91506
  993.   Phone: (818) 842-5117 FAX:   (818) 842-5488
  994.   Also publishes Scouting Reports and Buyers' Guides
  995.  
  996. Fax Focus [weekly, $250, free with membership in the AFA)
  997.   published by the American Facsimile Association
  998.   Phone: (215) 963-9110  Fax: (215) 451-1156
  999.  
  1000.  
  1001. -------------------------------------------------------------------------------
  1002. I.8    Books on Fax
  1003. -------------------------------------------------------------------------------
  1004.  
  1005. "FAX: Digital Facsimile Technology & Applications", 2nd Ed. 338pp.
  1006.   by Kenneth R. McConnell, Dennis Bodson, Richard Schaphorst
  1007.   1992, Artech House, Norwood, MA. ISBN: 0-89006-495-5
  1008.   (Order Book No. H04495, $78, Phone: 1 800 225 9977 or 1 617 769-9750)
  1009.  
  1010. -------------------------------------------------------------------------------
  1011. I.9    Other Sources of Information on Fax
  1012. -------------------------------------------------------------------------------
  1013.  
  1014. More detailed information on image file formats and compression may be 
  1015. obtained from the comp.graphics FAQ.  The latest version of this FAQ is
  1016. available on the archive site pit-manager.mit.edu (alias rtfm.mit.edu) as
  1017. pub/usenet/news.answers/graphics/faq.
  1018.  
  1019. Information on the Microsoft Windows Telephony API spec may be obtained by
  1020. ftp ftp.uu.net /vendors/microsoft/tapi-spec
  1021.     or
  1022. ftp ftp.uu.net /vendors/microsoft/telephony
  1023.  
  1024.  
  1025.  
  1026. ZyXEL Modem FAQ Archived at: ftp.cs.psu.edu in /pub/fenner/ZyXEL
  1027.  
  1028. ZyXEL BBS: (714) 693-0762
  1029.  
  1030. Supra BBS: (503) 967-2444
  1031.  
  1032. Intel BBS: (503) 645-6275
  1033.  
  1034. -------------------------------------------------------------------------------
  1035. I.10    Conferences on Fax
  1036. -------------------------------------------------------------------------------
  1037.  
  1038. BIS Strategic Decisions runs several conferences on fax and related 
  1039. technologies.  Every spring (May 12-14 this year) they hold the
  1040. "Facsimile and Image Communications Conference" and every fall 
  1041. (Nov. 30 - Dec. 1, 1993) they hold the "Annual Computer Fax Conference).
  1042.  
  1043. For more information call (617) 982-9500 (Fax: 878-6650).
  1044.  
  1045.  
  1046. -------------------------------------------------------------------------------
  1047. I.11    Associations Related to Fax Technology
  1048. -------------------------------------------------------------------------------
  1049.  
  1050. American Facsimile Association
  1051.   Phone: (215) 963-9110  Fax: (215) 451-1156
  1052.  
  1053. International Computer Fax Association
  1054.   Phone (617) 982-9500
  1055.  
  1056.  
  1057. ===============================================================================
  1058. Subject:    P.    Product Information
  1059. ===============================================================================
  1060.  
  1061. P.1    List of UNIX Fax Software
  1062. -------------------------------------------------------------------------------
  1063.  
  1064. COMMERCIAL
  1065. ==========
  1066.  
  1067. <company>        <product>
  1068.     <voice #>    <fax #>        <e-mail>
  1069. --------------------------------------------------
  1070.                - North America -
  1071.  
  1072. Alembic Systems International    Dfax
  1073.     (800) 452-7608            info@alembic.com
  1074.  
  1075. Arnet            ArnetFAX
  1076.     (615) 834-8000            clarence@arnet.com
  1077.  
  1078. Black and White Software    NXFax
  1079.     (802) 496-8500    (802) 496-5112    nxfax@bandw.com
  1080.  
  1081.  
  1082. COS Inc.        TruFax
  1083.     (609) 771-6705    (609) 530-0898    trufax@cosi.com
  1084.  
  1085. DigiBoard        DigiFAX
  1086.     (612) 943-9020            support@dbsales.digibd.com
  1087.  
  1088. Faximum Software    Faximum ELS, Faximum PLUS
  1089.     (604) 925-3600    (604) 926-8182    info@Faximum.com
  1090.  
  1091. Intuitive Technology    FaxLink
  1092.     (409) 762-8456
  1093.  
  1094. UniSal System        FaxTrax
  1095.     (201) 729-9221
  1096.  
  1097. V Systems        VSI-Fax
  1098.     (714) 545-6442            Brad@VSI.com
  1099.  
  1100.  
  1101.                - Europe -
  1102.  
  1103. comFax            Com-M-Tex 
  1104.     +49 89 546130-0
  1105.  
  1106. i link GmbH        mix fax
  1107.     +49 30 216 20 48
  1108.  
  1109. netCS GmbH        netFAX
  1110.     +49 30 787999-0
  1111.  
  1112. QUEST systems GmbH    FaxX
  1113.     +49 231 914028-0    +49 231 914028-40    faxx@quest.sub.org
  1114.  
  1115. Signify Software Products    i(F)x Faxsoftware for UNIX
  1116.     +31-(0)3480-30131    +31-(0)3480-30182     gerard@integrity.nl
  1117.  
  1118. smoFax            SMO GmbH 
  1119.     +49 721 551971
  1120.  
  1121.  
  1122.  
  1123. PUBLICALLY AVAILABLE
  1124. ====================
  1125.  
  1126. FlexFAX
  1127. =======
  1128.     FlexFAX Release Version 2.1.0 Available
  1129.     ---------------------------------------
  1130.  
  1131.     This note has the following sections:
  1132.  
  1133.     Overview
  1134.     Supported Systems
  1135.     About the Distribution
  1136.     Class 1 Modem Support
  1137.     Commonly Asked Questions
  1138.     How to Obtain the Distribution by FTP
  1139.     How to Obtain the Distribution by Mail
  1140.     How to Obtain the Distribution within Silicon Graphics 
  1141.     What to do Once You've Retrieved Stuff (source distribution)
  1142.     What to do Once You've Retrieved Stuff (binary distribution)
  1143.     FlexFAX Mailing List
  1144.     Use and Copyright
  1145.  
  1146.  
  1147.     Overview
  1148.     --------
  1149.     FlexFAX is a facsimile system for UNIX systems.  It supports:
  1150.  
  1151.     o sending facsimile
  1152.     o receiving facsimile
  1153.     o polled retrieval of facsimile
  1154.  
  1155.     Facsimile can be any size (e.g. A4, B4), either 98 or 196 lpi, and
  1156.     transmitted/received as either 1D-encoded or 2D-encoded facsimile data
  1157.     (2D-encoded data is frequently more compact and hence takes a shorter
  1158.     time to communicate).
  1159.  
  1160.     Outgoing documents can be any format; the sendfax program uses a
  1161.     rule-based definition file similar to the System V /etc/magic file 
  1162.     to deduce document types and to decide how to convert each document
  1163.     to a form suitable for transmission (either PostScript or TIFF/F).
  1164.     Automatic cover page generation is supported and users can easily
  1165.     tailor cover pages to their environment.  A simple text-based
  1166.     phonebook database is supported by sendfax.  Information is also
  1167.     provided on how to trivially setup an email to fax gateway service.
  1168.  
  1169.     Incoming facsimile are stored in a receiving area as TIFF/F files and
  1170.     may be automatically delivered by mail and/or printed.  A fax server
  1171.     status program, faxstat, can be used to monitor the send and receive
  1172.     queues, as well as the state of facsimile servers.
  1173.  
  1174.     Fax modems may be shared with outgoing data communication applications
  1175.     that honor the "uucp locking protocol".  These applications typically
  1176.     include: cu, tip, kermit, uucp, slip, and ppp.  The system can also be
  1177.     configured so that incoming data calls cause the system to invoke the
  1178.     standard system getty program.
  1179.  
  1180.     The software is structured around a client-server architecture.  One
  1181.     facsimile server process exists for each fax modem on a network.
  1182.     Clients may send facsimile from any machine that can communicate with
  1183.     the machine(s) on which the server(s) reside.  Client software is
  1184.     designed to be lightweight and easy to port; imaging can be offloaded
  1185.     to the server or done on the client.  (Imaging is, however, typically
  1186.     done on the server because it simplifies administration.)  Multiple
  1187.     modems may be located on a single machine.  An access control mechanism
  1188.     is included to control which users on which machines may submit
  1189.     documents for transmission.
  1190.  
  1191.     The system supports a wide variety of fax modems.  Any Class 1 or
  1192.     Class 2 modem should work with the system.  The following modems have
  1193.     been used successfully with the software:
  1194.  
  1195.     Class 1 modems:
  1196.         Digicom Scout+        (firmware revision 2A19/2931 or newer)
  1197.         Nuvo Voyager 96424PFX    (firmware revision AF-C2500-E0)
  1198.         SupraFAX v.32bis    (firmware revision V1.200-H or newer)
  1199.  
  1200.     NOTE: SEE THE SECTION "Class 1 Modem Support" FOR IMPORTANT INFO ON THE
  1201.           CLASS 1 MODEM SUPPORT
  1202.  
  1203.     Class 2 modems:
  1204.         Boca M1440E        (firmware revision V1.270 or newer)
  1205.         Dallas Fax <something>    (no longer sold, not recommended)
  1206.         Everex 24/96D        (no longer sold)
  1207.         Hayes Optima 24+Fax96   (firmware revision TR00-J260-001 XXX or newer)
  1208.         Multi-Tech 1432BAI    (firmware revision 0307 I or newer)
  1209.         SupraFAX v.32bis    (firmware revision V1.200-C or newer)
  1210.         Telebit WorldBlazer    (firmware revision LA7.01)
  1211.         Twincom 144/DF        (firmware revision V1.200 or newer)
  1212.         ZyXel U1496E        (firmware revision 5.01 or newer)
  1213.  
  1214.     Other modems:
  1215.         Abaton InterFax 24/96    (no longer sold)
  1216.  
  1217.     Note however that some modems perform better than others.  The file
  1218.     MODEMS included in the distribution provides information about each
  1219.     modem that has been tried.
  1220.  
  1221.  
  1222.     Supported Systems
  1223.     -----------------
  1224.     The software has been ported to the following systems:
  1225.  
  1226.     sgi        Silicon Graphics 4D machines w/ AT&T C++ compiler or gcc 2.3.3
  1227.     sun        Sun3/Sun4 w/ SunOS 4.1.X and GNU gcc 2.3.3
  1228.     bsdi    BSD/386 1.0 w/ GNU gcc 2.3.3
  1229.     386bsd    386bsd 0.1 on an Intel 486 w/ GNU gcc 2.3.3+patches
  1230.     svr4    System V Release 4 on an Intel x86 w/ GNU gcc 2.3.3 (incomplete)
  1231.     solaris2    Solaris 2.x on a Sun4 with GNU gcc 2.3.3 (incomplete)
  1232.     sco        SCO ODT 2.0 (incomplete)
  1233.  
  1234.     Systems that are marked (incomplete) compile properly and can be used
  1235.     to send and receive facsimile, but may have known problems or may be
  1236.     lacking some utilities such as the faxaddmodem installation script.
  1237.  
  1238.     Porting the software is usually straightforward provided there is a
  1239.     working C++ compiler (e.g. gcc), PostScript imaging facility (e.g.
  1240.     ghostscript), and support for a limited subset of the POSIX system call
  1241.     interface.  System requirements are described more fully in the source
  1242.     code distribution.
  1243.  
  1244.  
  1245.  
  1246.     About the Distribution
  1247.     ----------------------
  1248.     There are two distributions: a binary version that is directly
  1249.     installable on a Silicon Graphics IRIX 4.0.x system and a source
  1250.     distribution.
  1251.  
  1252.     The executables in the binary version of this distribution are only
  1253.     for Silicon Graphics 4D processor-based systems.  The distribution
  1254.     is sure to work on any IRIX 4.0.x system, though it may also work
  1255.     on pre-4.0 os versions.
  1256.  
  1257.     The source distribution includes all the source code in the system
  1258.     except a small bit of code used to build a Display PostScript-based
  1259.     imager (this code is useless unless you have a developers agreement
  1260.     with Adobe for Display PostScript).  The system is written almost
  1261.     entirely in C++.  I use the AT&T 2.1 compiler, as supported by Silicon
  1262.     Graphics.  GNU gcc 2.3.3 has been successfully used to build this
  1263.     software on all systems.
  1264.  
  1265.     A PostScript interpreter program is needed for imaging outgoing
  1266.     facsimile on the server machine.  The binary distribution for Silicon
  1267.     Graphics machines includes an imaging program that requires the Display
  1268.     PostScript execution environment (dps_eoe) that is available with most
  1269.     versions of IRIX.  The source distribution includes a device driver for
  1270.     use with Ghostscript version 2.5.2 or later.
  1271.  
  1272.  
  1273.  
  1274.     Class 1 Modem Support (Caveat Emptor)
  1275.     -------------------------------------
  1276.     Most contemporary fax modems provide one of two command interfaces for
  1277.     communication between the host and modem: Class 1 or Class 2.
  1278.     (Actually, many modems that provide a Class 2 interface also provide a
  1279.     Class 1 interface.)  These interfaces are specified by the Electronic
  1280.     Industries Association/Telecommunications Industry Association
  1281.     (EIA/TIA).  The Class 1 standard provides minimal hardware support for
  1282.     fax communication while Class 2 adds many commands and places more
  1283.     functionality in the modem.
  1284.  
  1285.     FlexFAX includes drivers for both Class 1 and Class 2 modems.  Robust
  1286.     support for Class 1 modems places two requirements on the host system:
  1287.  
  1288.     o low latency for serial line input
  1289.     o near realtime response
  1290.  
  1291.     In a UNIX environment both these requirements can be problematic.  In
  1292.     particular, many UNIX systems increase the latency for data received on
  1293.     a serial port in order to reduce system overhead.  That is, input data
  1294.     are typically held in a low level device driver for some period of time
  1295.     before they are passed to the user so that bursts of input data can be
  1296.     delivered to the user together.  This behaviour is known to occur under
  1297.     the Silicon Graphics IRIX and SunOS 4.1.x operating systems; it may
  1298.     also occur under other systems.  It is important for the proper
  1299.     operation of the Class 1 driver that input data be delivered to the
  1300.     facsimile server as quickly as possible.  This may require making a
  1301.     non-standard call of some sort to the operating system.  For SGI
  1302.     systems this call is automatically done.  For SunOS systems it appears
  1303.     that the only way to minimize the input latency is to create a stream
  1304.     i/o module that accesses an internal interface (see the comments in the
  1305.     routine setInputBuffering in faxd/FaxServer.c++).
  1306.  
  1307.     The response time requirements are important for insuring that T.30
  1308.     protocol messages are received in a timely fashion.  On a loaded
  1309.     system the protocol process may be preempted by other activities and
  1310.     not be run fast enough to satisfy the protocol timing requirements.
  1311.     This can usually be guarded against by assigning the facsimile process
  1312.     a high scheduling priority.  Unfortunately most UNIX systems do not
  1313.     provide support for such facilities and so even if it is possible to
  1314.     receive serial line input with the minimum of delay, protocol timing
  1315.     requirements may not be met because of delays in scheduling the
  1316.     execution of the fax server process.  For this reason the facsimile
  1317.     server process attempts to raise its scheduling priority while it is
  1318.     actively sending or receiving facsimile.  At other times, such as when
  1319.     it is doing queue management operations, it runs at a normal priority.
  1320.     On Silicon Graphics systems the ``high priority'' is a nondegrading
  1321.     scheduling priority that is above the priorities of the normal system
  1322.     processes.  On other systems the server currently always runs at the
  1323.     same (normal) scheduling priority.  For more details consult the
  1324.     setProcessPriority routine in faxd/FaxServer.c++.
  1325.  
  1326.     In summary, if you want to use a Class 1 modem with this software and
  1327.     your system does not provide support for low latency serial line input
  1328.     you are likely to have troubles.  If your system does not provide a
  1329.     mechanism for raising process scheduling priority (note that this is
  1330.     not the same as the UNIX ``nice'' parameter), then you may see problems
  1331.     when the server is under load.  Exactly how much load will cause trouble
  1332.     is dependent on the system configuration and processing power.
  1333.  
  1334.  
  1335.  
  1336.     Commonly Asked Questions
  1337.     ------------------------
  1338.     Q: How is FlexFAX related to netfax (aka GNU fax)?
  1339.     A: Netfax is a simple fax package developed by folks at MIT and freely
  1340.        available under the terms of the GNU software agreement.  FlexFAX is
  1341.        a totally independent project that was intended to provide a robust
  1342.        facsimile service that supports a wide variety of modems and systems.
  1343.        FlexFAX is also publicly available, but with a different copyright
  1344.        agreement (see the copyright at the bottom of this note).
  1345.  
  1346.     Q: My modem is not listed as supported, will it work?
  1347.     A: If the modem conforms to the draft Class 2 standard that most vendors
  1348.        used to implement their ``Ersatz Class 2'' modems, then it should work
  1349.        with the software; probably with some minor modifications to one of the
  1350.        modem configuration files distributed with the system.
  1351.  
  1352.        If the modem conforms to the EIA-578 "Class 1" programming interface,
  1353.        then it will only work if the intended host provides certain system
  1354.        facilities.  At present the only machine that is *known* to provide
  1355.        the necessary facilities is the Silicon Graphics Indigo.
  1356.  
  1357.        Otherwise it is possible to support a modem by writing a new ``modem
  1358.        driver'' that is compiled into the facsimile server.
  1359.  
  1360.     Q: What's the best modem to buy/use with this software?
  1361.     A: First, if your system is incapable of supporting a Class 1 modem, then
  1362.        you need to use a Class 2 modem.  The best Class 2 modem that I have
  1363.        had experience with is the Everex 24/96D, but it is no longer sold and
  1364.        it does not support the v.17 standard for transmitting and receiving
  1365.        at 14.4KB.  I have had good success with all the Class 1 modems listed
  1366.        above; though the Supra modem exhibits the usual problems known to exist
  1367.        with modems built around the Rockwell RC144DP (data pump).
  1368.  
  1369.  
  1370.  
  1371.     How to Obtain the Distribution by FTP
  1372.     -------------------------------------
  1373.     The source code is available for public ftp on
  1374.     sgi.com            sgi/fax/v2.1.src.tar.Z
  1375.         (192.48.153.1)
  1376.  
  1377.     You can also obtain inst'able images for Silicon Graphics machines from
  1378.     sgi.com            sgi/fax/v2.1.inst.tar
  1379.         (192.48.153.1)
  1380.  
  1381.     For example,
  1382.     % ftp -n sgi.com
  1383.     ....
  1384.     ftp> user anonymous
  1385.     Password: <use mail address as password>
  1386.     ftp> cd sgi/fax
  1387.     ftp> binary
  1388.     ftp> get v2.1.src.tar.Z
  1389.     ....
  1390.     ftp> quit
  1391.  
  1392.     In general, the latest version of the 2.1 release of the software is
  1393.     always available as "v2.1.src.tar.Z" or "v2.1.inst.tar" in the ftp
  1394.     directory.  This file is a link to the appropriate released version (so
  1395.     don't waste your time retrieving the linked file as well!) Any files of
  1396.     the form v2.1.*.patch are shell scripts that can be used to patch older
  1397.     versions of the source code.  For example, the file v2.1.0.patch would
  1398.     contain patches to update v2.1.0.tar.Z.  Patch files only work to go
  1399.     between consecutive versions, so if you are multiple versions behind
  1400.     the latest release, you will need to apply each patch file between your
  1401.     current version and the latest.
  1402.  
  1403.  
  1404.     How to Obtain the Distribution by Mail
  1405.     --------------------------------------
  1406.     Do not send me requests for the software; they will be ignored (without
  1407.     response).  If you cannot use FTP at all, there is a service called
  1408.     "ftpmail" available from gatekeeper.dec.com:  you can send e-mail to
  1409.     this machine and it will use FTP to retrieve files for you and send you
  1410.     the files back again via e-mail.  To find out more about the ftpmail
  1411.     service, send a message to "ftpmail@gatekeeper.dec.com" whose body
  1412.     consists of the single line "help".
  1413.  
  1414.  
  1415.     How to Obtain the Distribution within Silicon Graphics 
  1416.     ------------------------------------------------------
  1417.     Internal to Silicon Graphics there are inst'able images on the host
  1418.     flake.asd in the directory /usr/dist.  Thus you can do something like:
  1419.  
  1420.     % inst -f flake.asd.sgi.com:/usr/dist/flexfax
  1421.  
  1422.     to install the latest version of the software on your machine.
  1423.  
  1424.  
  1425.     What to do Once You've Retrieved Stuff (source distribution)
  1426.     ------------------------------------------------------------
  1427.     The source distributions come in a compressed tar file.  To extract the
  1428.     software do something like:
  1429.  
  1430.     % mkdir fax; cd fax
  1431.     % zcat <somewhere>/v2.1.src.tar.Z | tar xf -
  1432.  
  1433.     (uncompress and extract individual files in current directory).  Then
  1434.     follow the instructions in the file README in the top of the source tree.
  1435.  
  1436.     What to do Once You've Retrieved Stuff (binary distribution)
  1437.     ------------------------------------------------------------
  1438.     The binary distribution comes as a tar file that contains images for
  1439.     use with the standard Silicon Graphics installation program inst(1).
  1440.     To unpack the inst images do something like:
  1441.  
  1442.     % mkdir dist; cd dist
  1443.     % tar xf <somewhere>/v2.1.inst.tar
  1444.  
  1445.     Next, run inst to install the appropriate pieces that you want.  The
  1446.     key documentation from the source distribution is included in the
  1447.     subsystem flexfax.man.readme.  When this subsystem is installed the
  1448.     README file and other useful pieces of information are placed in the
  1449.     directory /usr/local/doc/flexfax.  Otherwise the software is broken
  1450.     into two areas: flexfax.client.* for software needed on client machines,
  1451.     and flexfax.server.* for software needed on a machine where a fax
  1452.     modem is located.  To unpack and install the client portion:
  1453.  
  1454.     % mkdir dist; cd dist
  1455.     % tar xf ../v2.1.inst.tar
  1456.     % cd ..; inst -f dist/flexfax
  1457.     ...
  1458.     inst> go
  1459.  
  1460.     (Note, the dist subdirectory is because some versions of inst fail if
  1461.     the files are in the current directory.)  Note that server binaries are
  1462.     not installed by default, so to get them also you need to do:
  1463.  
  1464.     % inst -f flexfax
  1465.     ...
  1466.     inst> install flexfax.server.*
  1467.     inst> go
  1468.  
  1469.     Remember that to install a server on a Silicon Graphics machine, you
  1470.     need to have already installed the Display PostScript execution
  1471.     environment product (dps_eoe).  Otherwise, the fax server will not be
  1472.     able to convert PostScript to facsimile for transmission.
  1473.  
  1474.  
  1475.     FlexFAX Mailing List
  1476.     --------------------
  1477.     A mailing list for users of this software is located on sgi.com.
  1478.     If you want to join this mailing list or have a list-related request
  1479.     such as getting your name removed from it, send a request to
  1480.  
  1481.     flexfax-request@sgi.com
  1482.  
  1483.     Submissions (including bug reports) should be directed to:
  1484.  
  1485.     flexfax@sgi.com
  1486.  
  1487.     When corresponding about this software please always specify what
  1488.     version you have, what system you're running on, and, if the problem is
  1489.     specific to your modem, identify the modem and firmware revision.
  1490.  
  1491.  
  1492.  
  1493.     Use and Copyright
  1494.     -----------------
  1495.     Silicon Graphics has seen fit to allow me to give this work away.  It
  1496.     is free.  There is no support or guarantee of any sort as to its
  1497.     operations, correctness, or whatever.  If you do anything useful with
  1498.     all or parts of it you need to honor the copyright notices.   I would
  1499.     also be interested in knowing about it and, hopefully, be acknowledged.
  1500.  
  1501.         Sam Leffler    (sam@sgi.com)
  1502.  
  1503.  
  1504.     Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993 Sam Leffler
  1505.     Copyright (c) 1991, 1992, 1993 Silicon Graphics, Inc.
  1506.  
  1507.     Permission to use, copy, modify, distribute, and sell this software and 
  1508.     its documentation for any purpose is hereby granted without fee, provided
  1509.     that (i) the above copyright notices and this permission notice appear in
  1510.     all copies of the software and related documentation, and (ii) the names of
  1511.     Sam Leffler and Silicon Graphics may not be used in any advertising or
  1512.     publicity relating to the software without the specific, prior written
  1513.     permission of Sam Leffler and Silicon Graphics.
  1514.  
  1515.     THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
  1516.     EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
  1517.     WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
  1518.  
  1519.     IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
  1520.     ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
  1521.     OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
  1522.     WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
  1523.     LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
  1524.     OF THIS SOFTWARE.
  1525.  
  1526.  
  1527. GNU NetFax (a.k.a. fax-3.2.1)
  1528. =============================
  1529.  
  1530. on uunet.uu.net as systems/gnu/fax-3.2.1.tar.z (gzip format)
  1531.     To answer all the queries on NetFax:
  1532.  
  1533.     - I have taken over maintenance of NetFax.
  1534.     - I am currently integrating numerous fixes provided by various
  1535.       people which include:
  1536.         - support for Zykel Modems
  1537.         - Use more standard Class 2 commands
  1538.         - Setup configuration files for modems
  1539.         - support for Xenix
  1540.           (This isn't a priority, except that I'm already doing it
  1541.            for a client)
  1542.         - Better compilation and installation
  1543.     - There are a lot of problems with the current release, I don't
  1544.       expect that it will work on the majority of modem/system combinations
  1545.       without work.  
  1546.     - If you have any fixes, or improvements please send them to 
  1547.       me mintha@geog.ubc.ca or bug-fax@ai.mit.edu
  1548.     - I hope to have a new release out in a few weeks.
  1549.  
  1550.     Following are some hints on getting the current version of
  1551.     NetFax working (for the impatient :)  I haven't tried all of these
  1552.     but they may help.
  1553.  
  1554.     - Use GNU make
  1555.     - It won't work on Xenix
  1556.     - If when you send a fax, it gets received twice as long as it
  1557.       should (22 inches instead of 11) try:
  1558.         - Use dfaxlow driver with Ghostscript (easiest) or
  1559.         - Change the source to use the +FDCC=xxxx/+FDCS=xxxx instead of
  1560.           +FDT=xxx
  1561.  
  1562.     The following modems are reported to work with NetFax 3.2.1
  1563.  
  1564.     Supra FaxModem 14.4 (v. 1.20C or later)
  1565.     Vivi 2496ef FaxModem (Has the resolution problem described above)
  1566.     Everex 24/96 D
  1567.  
  1568.     If you'd like to help me testing the new version, especially if you
  1569.     have something other than Supra Faxmodems, drop me a line.
  1570.  
  1571.     Jim
  1572.     --
  1573.     Jim Mintha                       Home: (604) 731-7240 or 737-6094
  1574.     mintha@geog.ubc.ca               Work: (604) 822-2269 or 465-5074
  1575.  
  1576. -------------------------------------------------------------------------------
  1577. P.2    List of MS-DOS Fax Software
  1578. -------------------------------------------------------------------------------
  1579.   <Need more information>
  1580.  
  1581. -------------------------------------------------------------------------------
  1582. P.3    List of MacIntosh Fax Software
  1583. -------------------------------------------------------------------------------
  1584.   <Need more information>
  1585.  
  1586. -------------------------------------------------------------------------------
  1587. P.4    List of Windows Fax Software
  1588. -------------------------------------------------------------------------------
  1589.   <Need more information>
  1590.  
  1591. -------------------------------------------------------------------------------
  1592. P.5    List of OS/2 Fax Software
  1593. -------------------------------------------------------------------------------
  1594.   <Need more information>
  1595.  
  1596. -------------------------------------------------------------------------------
  1597. P.6    List of Fax Modem Vendors
  1598. -------------------------------------------------------------------------------
  1599.  
  1600. Company               Classes    Phone        Fax
  1601. =====================  =======    ==============    ==============
  1602.  
  1603.     -- North America --
  1604.  
  1605. AT&T Paradyne        1    (813) 530-2090    (813) 530-2103
  1606. Computer Peripherals    2    (805) 499-5751    (805) 498-8306
  1607. Hayes            1    (404) 441-1617    (404) 441-1213
  1608. Intel            1    (503) 629-7354    (503) 629-7580
  1609. MICC            2    (408) 980-9565    (408) 980-9568
  1610. Macronix        2    (408) 453-8088
  1611. MultiTech Systems    2    (612) 785-3500    (612) 785-9874
  1612. Practical Peripherals    1,2    
  1613. Supra Corporation    1,2    (503) 967-2400    (503) 967-2401
  1614. Telebit            2    (408) 734-4333    (408) 734-3333
  1615. The Complete PC        1,2    (408) 434-0145    (408) 434-1048
  1616. U.S. Robotics        1    (800) DIAL-USR    (708) 982-5253
  1617. Zoom            2    (617) 423-1072    (617) 423-9231
  1618. ZyXEL USA        2    (714) 693-0808    (714) 693-8811
  1619.  
  1620.     -- Australia  (courtesy of adam@saki.com.au )--
  1621.  
  1622. Supplier            Model          Class     Phone/Fax
  1623. ==================  =============  ========  ==================
  1624.  
  1625. NetComm             M4F, M7F        2,2.0    +61 2 888 5533
  1626. Dataplex            DPX-223         2        +61 3 210 3333
  1627.             DPX-225         2
  1628. Interlink           Fax Modem 3     2        +61 3 525 3388
  1629. Maestro             9600XR          2        +61 6 239 2369
  1630. Banksia             BitBlitzer      2        +61 2 418 6033
  1631.  
  1632.     -- Europe --
  1633.  
  1634. Dr. Neuhaus         ?               ?        +49 40 55304290/+49 40 55304180
  1635.  
  1636.  
  1637.  
  1638.   <Need more information>
  1639.  
  1640.  
  1641. --------------------------------------------------------------
  1642. Contributors to and/or Sources of Information Used in this FAQ
  1643. --------------------------------------------------------------
  1644. adam@shinto.saki.com.au (Adam Donnison)
  1645. dir@teal.csn.org (Daniel I. Rosenblatt)
  1646. gerard@integrity.nl (Gerard Huysmans)
  1647. hrs1@cbnewsi.cb.att.com (herman.r.silbiger)
  1648. johnh@cs.arizona.edu (John M Hughes)
  1649. mckeeveb@monashee.sfu.ca (Rob McKeever)
  1650. mintha@geog.ubc.ca (Jim Mintha)
  1651. naddy@mips.ruessel.sub.org (Christian Weisgerber)
  1652. regebro@stacken.kth.se (Lennart Regebro)
  1653. root@gandalf.greenie.gold.sub.org (KlausRosenauer)
  1654. sam@sgi.com (Sam Leffler)
  1655. tnixon@microsoft.com (Toby Nixon)
  1656. udo@sensai.quest.sub.org (Udo Klimaschewski)
  1657. uli@sensai.quest.sub.org (Uli Zug)
  1658. wes@kofax.com (Wes Chalfant)
  1659. wrob@unixg.ubc.ca (Robert Wong)
  1660.  
  1661. and of course, the author/editor of this FAQ: 
  1662.     pajari@Faximum.com (George Pajari)
  1663.  
  1664. -------------------------------------
  1665. Posters of Questions Used in This FAQ
  1666. -------------------------------------
  1667. fung@ee.rochester.edu (Hei Tao Fung)
  1668. idhs500@indyvax.iupui.edu (Scott Le Fevre)
  1669. kuo@teal.csn.org (David R. Love)
  1670.  
  1671. --------------------------------------------------------------------------
  1672. This material is not copyright.  Permission to copy freely granted.
  1673. Acknowledgement citing George Pajari, Faximum Software appreciated.
  1674. --------------------------------------------------------------------------
  1675.